This Leather remote control lace fits the latch of the Full metal Bracket, all versions Mk1 - Mk3.
Instructions for fitting it to your Full metal Bracket. The one end of the lace which is already fixed to the aluminium M5 threaded boss is usually used on the right hand side of the bracket / bike. It's a slightly longer end of the two and makes the knot and the 'finger loop end' slightly off center left of the frame tube. This way it's more convenient for people getting on and off the bike on the left side (most people). If you jump off your bike on the right hand side instead you can choose to use the 'fixed' end on the left side.
You best put the bike in a stand or uside down before you start to have a good view on the underside of the Full metal Bracket. Both ends of the lace (one end still has the aluminium boss attached to it) are led through the Full metal Bracket, not around it, just as can be seen in the video. Push the aluminium boss through the hole in the latch. Now unwind the unused grub screw just far enough to expose the hole in the threaded boss, lead the loose end of the lace through the hole and tighten the grub screw. Don't overtighten it, you might cut the leather if you do. Just lightly tighten similar to the 'fixed' side.
Specs:
Material: Dark brown 'Naturel Dyed' leather from cows, Aluminium threaded boss, stainless steel grub screws with boiled Linseed oil as a light thread locker
Weight: 9 grams (Remote with 3mm lace is 6 grams)
Note: Also available in a 'vegan' Stainless steel version